Preg 103 Engineering Graphics                      Assignment 1                    17 January 2012

I. Starting the AutoSketch Program

step 1: If the computer is not already on, turn on the monitor and the computer.

step 2: Double click on the AutoSketch icon to start the AutoSketch program.

II. Sending a File to the Instructor Over the Network

A drawing file can be sent to the instructor as an attachment to an e-mail message.

step 1: Go to webmail.sbu.edu/exchange in Internet Explorer.

step 2: Create a new e-mail message addressed to jkiefer@sbu.edu.

step 3: Identify the assignment you’re submitting in the subject line.

step 4: Attach the drawing file you are submitting.

step 5: Send.

A note about file names: Use a consistent naming scheme for the files that you submit to the instructor. The file name should uniquely identify not only yourself, but also the assignment number. Thusly, use your three (or two) initials dash assignment number: jk-04b.skf . [Autosketch will attach the skf extension.]

III. Assignment 1 [Due 17 January]

Start the AutoSketch program, and open one of the sample drawings. Save the sample drawing with a new file name, as described in the note about file names in Part II. Close the drawing, and close AutoSketch. Send the copy of the sample drawing that you selected to the instructor, as described above in Part II. Don’t forget to save your renamed copy of the file to a diskette or another location and erase it from the hard drive. Don’t erase the original sample!